Kobra 270 TS C4

1,064.80 €
– +
Add to wish list

Kobra 270 TS C4

PROFESSIONAL TOUCH SCREEN SHREDDER FOR MEDIUM OFFICES - 3,9 X 40 MM (P-4) CROSS CUT

Touch Screen shredder: all controls are activated by simply touching the panel. The Electronic Power Control (EPC) shows the shredding load required to optimise shredding without jams.
Motor thermal protection. 24 hours continuous duty motor: no duty cycle or timed cool down period. Equipped with "Super Potential Power Unit": heavy duty chain drive system with steel gears. Carbon hardened cutting knives, unaffected by staples and metal clips; high precision design of cutting knives allows high shred loads with low power consumption.

 

Two separate set of cutting knives: one for paper and one for CDs, DVDs, credit cards. Two distinct integrated removable bins to separate shredded paper from plastic shreds. Kobra 270 TS models can shred transparent material too: keep your finger for 5 seconds on the Forward control and the machine works continuously for 30 seconds.
Equipped with "Energy Smart" system for power saving stand-by mode, automatic disconnection from the mains, bag full stop with light signal. Convenient 110 litres cabinet mounted on casters.

Technical data

Throat width: 310 mm
Shred size: cross cut 3,9x40 mm
Security Level ISO/IEC 21964 (DIN 66399): P-4 O-3 T-4 E-3 F-1
Sheet Capacity: 24-26 (A4 70gr); 19-21 (A4 80gr)
Shreddable Material: Paper, CD/DVD, Credit Cards, Credit Cards with chip, Film
Speed: 0,07 m/sec
Noise Level (idle/shredding): 54/55 dba
Waste bin volume: 110 l
Voltage: 230 V
Power: 500 W
Dimensions (WxDxH): 53x43x88 cm
Net Weight: 46 kg

 

Certification marks: CB - CE - CSA

 

Consumable materials:
- Plastic bags
- Kobra oil to lubricate the cutting knives box of 24 bottles 125 cc. each
- Kobra oil for AO Automatic Oiler to lubricate the cutting knives box of 24 bottles 1 liter each

Metal Detector and Automatic Oiler (Optionals)

PROTECTION AND LUBRICATION OF CUTTING KNIVES

The SHRED GUARD metal detector provides the Kobra shredders with additional protection against large metal objects inadvertently introduced into the shredder. SHRED GUARD stops the machine immediately preventing any possible damage  to the cutting system. An illuminated optical indicator warns the operator of the presence of metal.

 

An AUTOMATIC OILING SYSTEM on your shredder completely eliminates the need to manually lubricate the unit. Not only does this protect the blades with anti-corrosive agents, but ensures maximum reliability, efficiency and capacity. High security and cross-cut shredders benefit most from this practical option.

Check alternative models

Kobra 270 TS C2

$ $